This is an introductory welding class hosted in Plympton, MA

Thursday June 13, 2024

6 p.m. - 10 p.m. (4 hr class)

Cost: $200 (4 hr), includes materials and PPE

Woman And Machine is holding an ‘Intro to MIG Welding' welding class on Thursday evening, June 13, 2024 starting at 6 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 6 students. This is a Co-Ed Class so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the class is sold out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.

*to sign up for the waitlist email info@womanandmachine.org with subject line - Intro to MIG Class 6/13/2024 Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the evening with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc.

What You Will Learn:

Safety for welders

Basics of the weld machine and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Tuesday evening, June 4th from 6 - 9 p.m. (give or take a half hour)

Cost: $125, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create a metal dragonfly. Finished student dragonflies will range in size (the student chooses how their dragonfly will look). For reference the class model piece is 7.5” long from head to tail. The student can choose to keep their dragonfly free as in the picture or it can be put on a stake to put in the ground.

What You Will Learn:

Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Bench Grinder

-Plasma cutter

-Vice

-MIG Welders

How to prep metal

Design and fabrication of art pieces

Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

You will be provided with safety gear for the duration of class. If you have your own welding gear you are welcome to bring it to class to use instead of borrowing. 

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

To sign-up for class please go to the Store

This is an introductory metal art class hosted in Plympton, MA

Tuesday Evening - May 21, 2024

6 p.m. - 9 p.m. (give or take a half hour)

Cost: $130, includes materials and PPE

This is an introduction to metal art course that leads you through how to make a metal sunflower. There will be two options for class where you can either make a large sunflower that will hang or make a sunflower that will stake into the ground.

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be able to run 24 hours prior. An option will be given to move to another art class scheduled later in the year or a refund can be issued.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Belt Sander

-Plasma Cutter

-MIG Welder

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Thursday evening, May 9th from 6 - 9 p.m.

Cost: $135, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal butterflies. Finished student butterflies will range in size (the student chooses how their butterfly will look). For reference the class model piece is 11” long. It is a large metal butterfly that looks great in a garden setting.

What You Will Learn:

Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Bench Grinder

-Plasma cutter

-Vice

-MIG Welders

How to prep metal

Design and fabrication of art pieces

Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This is an introductory welding class hosted in Plympton, MA

Wednesday evening, June 7, 2023

6 p.m. - 10 p.m. (4 hr class)

Cost: $300 (4 hr), includes materials and PPE

Woman And Machine is holding an ‘Intro to TIG Welding' class on Wednesday evening, June 7, 2023 starting at 6 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 4 students. This is a Co-Ed Class so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the class is sold out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.

*to sign up for the waitlist email info@womanandmachine.org with subject line - Intro to TIG Class 6/7/2023 Waitlist. Please include in your email your name and phone number.

We will cover various aspects of TIG welding over the course of the day with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of TIG, etc.

What You Will Learn:

Safety for welders

Basics of the weld machine and various components of the welder

How to properly set-up a welder

Welding steel in the Flat

Proper techniques for welding "tee", "lap"

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Wednesday evening, May 24th from 6 - 9 p.m. (give or take a half hour)

Cost: $125, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create a metal hummingbird. Finished student hummingbirds will range in size (the student chooses how their piece will look).

What You Will Learn:

Safety for working with metal/welders/metalworking tools

-Hand Grinders

-Bench Grinder

-Vice

-MIG Welders

How to prep metal

Design and fabrication of art pieces

Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

You will be provided with safety gear for the duration of class. If you have your own welding gear you are welcome to bring it to class to use instead of borrowing.

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

To sign-up for class please go to the Store

Private TIG Class

This is a 6 week welding course hosted in Plympton, MA

Runs Wednesday Evenings starting February 22, 2023 until March 29, 2023

Wednesday Evenings 2/22, 3/1, 3/8, 3/15, 3/22, 3/29

6 p.m. - 9 p.m. every Wednesday

Cost: $550, includes materials and PPE

Woman And Machine is holding a beginner 6 week welding program on Wednesday nights starting February 22nd from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 6 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Winter2023- Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review more in-depth information about setting the welder appropriately, basics of fabrication, small weld projects, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) *but if you have your own gear feel free to bring it to the class!

*For this program I do highly suggest that you purchase your own hood and gloves but is not necessary to come to class.

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This is a 6 week welding course hosted in Plympton, MA

Runs Wednesday Evenings starting February 22, 2023 until March 29, 2023

Wednesday Evenings 2/22, 3/1, 3/8, 3/15, 3/22, 3/29

6 p.m. - 9 p.m. every Wednesday

Cost: $550, includes materials and PPE

Woman And Machine is holding a beginner 6 week welding program on Wednesday nights starting February 22nd from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 6 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Winter2023- Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review more in-depth information about setting the welder appropriately, basics of fabrication, small weld projects, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) *but if you have your own gear feel free to bring it to the class!

*For this program I do highly suggest that you purchase your own hood and gloves but is not necessary to come to class.

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This is a 6 week welding course hosted in Plympton, MA

Runs Wednesday Evenings starting February 22, 2023 until March 29, 2023

Wednesday Evenings 2/22, 3/1, 3/8, 3/15, 3/22, 3/29

6 p.m. - 9 p.m. every Wednesday

Cost: $550, includes materials and PPE

Woman And Machine is holding a beginner 6 week welding program on Wednesday nights starting February 22nd from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 6 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Winter2023- Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review more in-depth information about setting the welder appropriately, basics of fabrication, small weld projects, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) *but if you have your own gear feel free to bring it to the class!

*For this program I do highly suggest that you purchase your own hood and gloves but is not necessary to come to class.

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This is a 6 week welding course hosted in Plympton, MA

Runs Wednesday Evenings starting February 22, 2023 until March 29, 2023

Wednesday Evenings 2/22, 3/1, 3/8, 3/15, 3/22, 3/29

6 p.m. - 9 p.m. every Wednesday

Cost: $550, includes materials and PPE

Woman And Machine is holding a beginner 6 week welding program on Wednesday nights starting February 22nd from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 6 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Winter2023- Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review more in-depth information about setting the welder appropriately, basics of fabrication, small weld projects, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) *but if you have your own gear feel free to bring it to the class!

*For this program I do highly suggest that you purchase your own hood and gloves but is not necessary to come to class.

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This is a 6 week welding course hosted in Plympton, MA

Runs Wednesday Evenings starting February 22, 2023 until March 29, 2023

Wednesday Evenings 2/22, 3/1, 3/8, 3/15, 3/22, 3/29

6 p.m. - 9 p.m. every Wednesday

Cost: $550, includes materials and PPE

Woman And Machine is holding a beginner 6 week welding program on Wednesday nights starting February 22nd from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 6 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Winter2023- Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review more in-depth information about setting the welder appropriately, basics of fabrication, small weld projects, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) *but if you have your own gear feel free to bring it to the class!

*For this program I do highly suggest that you purchase your own hood and gloves but is not necessary to come to class.

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This is a 6 week welding course hosted in Plympton, MA

Runs Wednesday Evenings starting February 22, 2023 until March 29, 2023

Wednesday Evenings 2/22, 3/1, 3/8, 3/15, 3/22, 3/29

6 p.m. - 9 p.m. every Wednesday

Cost: $550, includes materials and PPE

Woman And Machine is holding a beginner 6 week welding program on Wednesday nights starting February 22nd from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 6 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Winter2023- Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review more in-depth information about setting the welder appropriately, basics of fabrication, small weld projects, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) *but if you have your own gear feel free to bring it to the class!

*For this program I do highly suggest that you purchase your own hood and gloves but is not necessary to come to class.

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Saturday, February 11th from 9 a.m. - 2 p.m./3 p.m.

*Cost: $170 or $195, includes materials and PPE

*cost difference is based on whether you would like to make 3 flowers ($170) or a rose and 2 additional flowers ($195). Making the rose is time intensive and a little more involved in making than some of the other flower options which is the cost difference. You may also be at the workshop for an additional hour if you decide to make a rose

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal flowers.

Flower options:

Daisy

Carnation

Cosmos

Poppy

Tulip

Lily

Foliage

*Rose (must pick $195 class option)

What You Will Learn:

Safety for working with metal/welders/metalworking tools

-Hand Grinders/Belt Sander

-Porta Band Saw

-Plasma cutter

-Vice

-Hand Torch

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

This is a longer class but the pieces are pre-selected for you to create.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Thursday evening, January 26th from 6 - 9 p.m.

Cost: $85, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal reindeer. The reindeer are approximately 16” tall and 10” long.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders/Belt Sander

-Porta Band Saw

-Vice

-Hand Torch

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Wednesday evening, January 18th from 6 - 9 p.m.

Cost: $95, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal snowflake. The snowflakes are approximately 12” around.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders/Belt Sander

-Porta Band Saw

-Vice

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Tuesday evening, January 3rd from 6 - 9 p.m.

Cost: $100, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metalworking fundamentals to create the metal snowman. The snowmen are approximately 18” - 20” tall.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders/Belt Sander

- Cutoff Wheel

-Vice

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Wednesday evening, December 21st from 6 - 9 p.m.

Cost: $95, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal roses.

What You Will Learn:

Safety for working with metal/welders/metalworking tools

-Hand Grinders/Belt Sander

-Porta Band Saw

-Plasma cutter

-Vice

-Hand Torch

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Thursday evening, December 15th from 6 - 9 p.m.

Cost: $95, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal snowflake. The snowflakes are approximately 12” around.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders/Belt Sander

-Porta Band Saw

-Vice

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Tuesday evening, December 13th from 6 - 9 p.m.

Cost: $150, includes materials and PPE

I will be able to take 4 students, with a minimum of 4 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal Christmas tree. The Christmas Trees are approximately 20” tall.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

- Squaring and leveling

-Various hand tools 

-Vice

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Thursday evening, December 8th from 6 - 9 p.m.

Cost: $85, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metal working fundamentals to create the metal reindeer. The reindeer are approximately 16” tall and 10” long.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders/Belt Sander

-Porta Band Saw

-Vice

-Hand Torch

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This class is a metal art class located in Plympton, Massachusetts:

Wednesday evening, December 7th from 6 - 9 p.m.

Cost: $100, includes materials and PPE

I will be able to take 6 students, with a minimum of 3 necessary to run the class. I will be in contact to let you know if the class will be run or not 24 hours prior, an option will be given to move to another art class given later in the year or a refund will be given if you choose not to.

For class we will be reviewing various metalworking fundamentals to create the metal snowman. The snowmen are approximately 18” - 20” tall.

What You Will Learn:

-Safety for working with metal/welders/metalworking tools

-Hand Grinders/Belt Sander

- Cutoff Wheel 

-Vice

-MIG Welders

-How to prep metal

-Design and fabrication of art pieces

-Fit and finish of art pieces

This is a short class where the piece is pre-selected for you to create. It will not be as in-depth as some of the other classes offered are but will give you a small taste of creating a piece of metal art.

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time. The exact address will be sent to you via email, please be looking for it.

We will provide safety gear but if you have your own gear feel free to bring it to the class!

Wear work boots, a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the workshop)If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This is a 6 week welding course hosted in Plympton, MA

Runs Wednesday Evenings starting September 21, 2022 until October 26, 2022

6 p.m. - 9 p.m. every Wednesday

Cost: $550, includes materials and PPE

Woman And Machine is holding an introductory 6 week welding program on Wednesday nights starting September 21 from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 4 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Fall2022-Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*For this program I do highly suggest that you purchase your own hood and gloves. Lincoln offers Woman And Machine students 20% off all PPE

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This is a 6 week welding course hosted in Plympton, MA

Runs Wednesday Evenings starting September 21, 2022 until October 26, 2022

6 p.m. - 9 p.m. every Wednesday

Cost: $550, includes materials and PPE

Woman And Machine is holding an introductory 6 week welding program on Wednesday nights starting September 21 from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 4 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Fall2022-Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*For this program I do highly suggest that you purchase your own hood and gloves. Lincoln offers Woman And Machine students 20% off all PPE

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store

This is a 6 week welding course hosted in Plympton, MA

Runs Wednesday Evenings starting September 21, 2022 until October 26, 2022

6 p.m. - 9 p.m. every Wednesday

Cost: $550, includes materials and PPE

Woman And Machine is holding an introductory 6 week welding program on Wednesday nights starting September 21 from 6 p.m - 9 p.m. at Karen Sullivan’s home shop in Plympton.

To give our participants the most amount of ‘rod time’, we can accept a maximum of 4 students. This is a Co-Ed Program so both ladies and gentlemen are welcome to attend!

There will be a wait-list so if the program does sell out and you are still interested in possibly attending, please sign up for the waitlist and we will notify those on the wait-list if an opening becomes available.*to sign up for the waitlist email info@womanandmachine.org with subject line - 6 Week Welding Program/Fall2022-Waitlist. Please include in your email your name and phone number.

We will cover various aspects of MIG welding over the course of the program with about 1 hour dedicated to classroom time to review how the machine works, set-up, basics of welding, etc. Come ready to learn and weld!

What You Will Learn:

Safety for welders

Basics of welding and various components of the welder

How to properly set-up a welder

Welding steel in the Flat, Horizontal, Vertical, Overhead

Proper techniques for welding "tee", "lap", "corner", and "butt" joints

Welding defects; causes and cures

Important:

Please arrive at least 15 minutes early so we can start promptly at the designated time.

We will provide safety gear (welding jacket, gloves, hood) but if you have your own gear feel free to bring it to the class! Due to COVID, if you do have gear I am requesting that you bring it and use it for your time in the class.

*For this program I do highly suggest that you purchase your own hood and gloves. Lincoln offers Woman And Machine students 20% off all PPE

Wear work boots (steel toe are preferable), a pair of jeans that you do not mind getting dirty, and a 100% cotton shirt (this is all for your safety and protection, if you are not dressed appropriately you will not be able to participate in the class)

If you have medium to long hair, bring a hair tie to pull your hair back or already have your hair tied back.

Questions? Email: info@womanandmachine.org

To signup for class please go to the Store